MK Battery Deka® 6V 200Ah Valve-Regulated AGM Solar Battery Non-Spillable (8AGC2)
- Shipping:
- Calculated at Checkout
Product Images: Images are provided for illustrative purposes only and may not reflect the exact appearance, components, packaging, labeling, or configuration of the product received. Please refer to the product description and specifications for complete product details.
Description
MK Battery / Deka® 8AGC2-DEKA | 6 V ~190 Ah AGM Deep-Cycle Battery (Non-Spillable)
Overview
The Deka® 8AGC2-DEKA is a 6-volt, valve-regulated AGM (absorbed glass mat) deep-cycle battery engineered for solar, backup power, telecom, and motive-power applications. With approximately 190 Ah @ C/20 (and up to ~220 Ah @ C/100), its sealed, maintenance-free construction delivers dependable energy storage in demanding duty cycles.
Domestic sourcing matters—here’s how this product qualifies:
Proudly Made in the USA
Every MK Battery / Deka® 8AGC2-DEKA is built by East Penn Manufacturing Co. in Lyon Station, Pennsylvania—right here in the USA.
These batteries are crafted under one roof with decades of American engineering expertise, using a blend of U.S. and globally sourced materials to deliver consistent reliability and quality.
When you choose Deka®, you’re supporting American manufacturing and dependable power you can trust.
Key Features
- Valve-regulated AGM</strong) design — sealed, maintenance-free, non-spillable.
- ~190 Ah @ C/20 (≈220 Ah @ C/100) for robust deep-cycle performance.
- Low internal resistance for efficient charge acceptance and recovery.
- Rugged polypropylene case; lead-calcium plate alloy; vibration-resistant build.
- Air/ground transport approved (non-spillable) for versatile deployment.
Applications
- Off-grid and hybrid solar battery banks
- Telecom, UPS, SCADA, and remote monitoring backup power
- Golf cart / motive-power and mobility systems (sealed deep-cycle)
- Marine/RV house banks and industrial equipment
Technical Specifications
| Model | 8AGC2-DEKA (AGM) |
|---|---|
| Nominal Voltage | 6 V |
| Capacity @ C/100 | ~220 Ah |
| Capacity @ C/20 | ~190 Ah |
| Dimensions (L × W × H) | 10.25″ × 7.09″ × 10.88″ (260 × 180 × 276 mm) |
| Weight | ≈ 68 lb (31 kg) |
| Terminal Type | U (dual: SAE post + stud) |
| Plate Alloy | Lead-Calcium |
| Container / Cover | Polypropylene |
| Operating Temperature Range | –40 °F (–40 °C) to +140 °F (60 °C) |
| Recommended Charge @ 77 °F (25 °C) | Cycle: ~7.0–7.3 V · Float: ~6.7–6.8 V |
| Country of Manufacture | USA (East Penn Manufacturing) |
Design & Performance
Absorbed-glass-mat separators immobilize the electrolyte for spill-proof, orientation-flexible installation and superior vibration resistance. Tight plate compression and lead-calcium grids support long cycle life and stable voltage delivery, while the AGM chemistry enables fast recharge and reliable deep-discharge recovery with minimal maintenance.
