Description
Victron Energy SCC040010050 BlueSolar PWM-LCD 10A 48V Charge Controller
Overview
The Victron BlueSolar PWM-LCD 10A (SCC040010050) is a smart and efficient 48V solar charge controller designed for compact off-grid power systems. It features an integrated LCD screen for live status monitoring and settings, automatic load control, programmable battery charging profiles, and dual USB outputs for auxiliary device charging.
Built to deliver simple yet intelligent solar management in higher-voltage systems, this unit is perfect for industrial sensor platforms, remote lighting, and micro solar kits where space, budget, and functionality must align.
Key Features
- 48V System Compatibility: Engineered for 48V battery banks with automatic voltage detection and regulation.
- 10A PWM Charging: Reliable performance for modest 48V solar setups including lighting and sensor platforms.
- Integrated LCD Display: View system status, charging mode, and configure settings directly from the controller.
- Programmable Charging Algorithms: Supports AGM, GEL, flooded, and LiFePO4 batteries with predefined profiles.
- Low Voltage Disconnect (LVD): Built-in load output automatically protects batteries from deep discharge.
- Timer & Day/Night Function: Set lighting or load control based on sun cycle and adjustable durations.
- Dual USB Outputs: Charge mobile devices or small 5V electronics directly (2A total).
- Fully Protected: Reverse polarity, overload, short circuit, and thermal shutdown protection included.
Applications
- Small 48V off-grid lighting systems
- Remote monitoring and instrumentation setups
- Solar-powered 5V device charging (via USB)
- Security or environmental monitoring systems
- Cabins, equipment sheds, or kiosks with modest energy needs
Industries & Use Cases
- Telecommunications & remote control systems
- 48V sensor and data acquisition stations
- Low-power solar lighting and signage
- Off-grid telecom battery support
- Industrial low-voltage backup power
Technical Specifications
| Parameter | Value |
|---|---|
| Battery Voltage | 48V |
| Rated Charge Current | 10A |
| Max Solar Voltage | 100V |
| Load Output | Manual + low-voltage disconnect + timer |
| Self-Consumption | < 10mA |
| Absorption Voltage | 57.6V |
| Float Voltage | 54.8V |
| Low Voltage Disconnect | 44.8V |
| Low Voltage Reconnect | 50.4V |
| USB Output | 5V, 2A total (dual outputs) |
| Operating Temp. Range | -31°F to 140°F (-35°C to +60°C) |
| Humidity | Max 95% (non-condensing) |
| Dimensions (HxWxD) | 4.0 x 7.4 x 1.8 in (101 x 184 x 47 mm) |
| Terminal Size | AWG6 (16 mm²) |
| Weight | 0.66 lbs (0.3 kg) |
| Safety Standards | EN60335-1, IEC 62109-1 |
| EMC Compliance | EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
Note: For 48V systems use two 72-cell solar panels or four 36-cell panels in series for optimal performance.
Need More Technical Detail?
Need detailed timing logic or diagnostic behavior? Download the official Victron spec sheet here.
Warranty Information
Additional Information
Victron Energy SCC040010050 BlueSolar 10 Amp 48V PWM LCD & USB Charge Controller: |
|
Victron Energy BlueSolar PWM Charge Controller LCD & USB Owner/User Manual: |
