Ameresco AMS030J 30W 12V Solar Panel
- 10.00 LBS
- Calculated at Checkout
Certified for use in C1D2 conditions, the AMS030J 30 Watt 12 Volt Solar Panel has a silver anodized aluminum frame, white polyester back cover, and an 18-2 AWG polarized cable in the fully sealed junction box.
|30W PHOTOVOLTAIC MODULE – 20J||(1) STC 1000W/m2||(2) NOCT 800W/m2|
|Maximum power (Pmax)||30W||22W|
|Voltage at Pmax (Vmpp)||17.9V||15.9W|
|Current at Pmax (Impp)||1.68A||1.36A|
|Short circuit current (Isc)||1.74A||1.4A|
|Open circuit voltage (Voc)||22.1V||20.1V|
|Efficiency reduction at 200W/m2||<5% reduction (efficiency 10.0%)|
|Limiting reverse current||1.94A|
|Temperature coefficient of Isc||0.105%/°C|
|Temperature coefficient of Voc||-0.360%/°C|
|Temperature coefficient of (Pmax)||-0.45%/°C|
|Maximum series fuse rating||5A|
|Application class (according to IEC 61730:2007)||Class C|
|Maximum system voltage||50V (U.S. NEC) / 1000V (IEC 61730:2007)|
1. Values at Standard Test Conditions (STC): 1000W/m2 irradiance, AM1.5 solar spectrum and 25ºC module temperature
2. Values at 800W/m2 irradiance, Nominal Operation Cell Temperature (NOCT) and AM1.5 solar spectrum
3. Nominal Operation Cell Temperature: Module operation temperature at 800W/m2 irradiance, 20ºC air temperature, 1m/s wind speed
This tab is currently undergoing development. Please refer to our Shipping & Returns page for this information. Thank you.
This tab is currently undergoing development. Thank you.