888.680.2427

The Tower Kit

The Roof Mount Kit

Available in 27 and 45 foot kits Installs in a few hours No Cement No Gin Pole (27' only) No Winching No Sweat! Includes everything except pipe and anchors 45' Tower Kit includes gin pole hardware

No Room for a tower... Simple roof top tower mount offers easy installation for your AIR wind module Design includes vibration isolation mounts that reduce mechanically transmitted noise by 80% Installs on the side of a building or through the roof Includes everything except pole and mounting bolts

Wind Turbine Towers

	Air Marine Tower Hardware Kit Code:TWA-20-03 Price: $192.00 Quantity in Basket: none
Air Marine Tower Hardware Kit for 9' Marine Aluminum Pole Set
	9' Air Marine Aluminum Pole Set Code:TWA-20-02 Price: $208.00 Quantity in Basket: none
9' Air Marine Aluminum Pole Set. Includes aluminum power coated mast and stays.
	Roof Mount Kit With Seal Code:TWA-09-01 Price: $110.00 Quantity in Basket: none
Roof Mount Kit With Seal. Mounting hardware with 4 rubber isolators (does not include pole or lag screws). Kits Include: (4)Isolators (2)Base Plates (2)Clamp Sleeves (2)Clamp Straps (4)5/16' x 1' Bolts (4)5/16' Lock Washers (2)Safety Leashes (1)Optional Roof Seal Kits include all parts for installation for 1-7/8" OD (47 mm) steel pipe with a .065" (1.6 mm) wall thickness and mounting bolts
	27' Air Guyed Tower Kit Code:TWA-10-01 Price: $169.00 Quantity in Basket: none
27' Air Guyed Tower Kit, does not include poles & anchors (Air Only), Kit Includes: (1)Base Connector (1)Lower Wire Set (160 ft. pre-cut) (2)Base Staples (2)3/8" x 1.5" Bolt (2)3/8" Locknut (4)Cable Thimbles (8)Cable Clamps Pipes Needed:(Available at fence suppliers) Schedule 40 for 120 MPH wind rating Tower Kits use 1-7/8 inch (47.5 mm) Steel Tubing (1)24 foot (7.2 meter) length for tower (1)3 foot (6.3 meter) length for tower (1)6 foot (1.8 meter) length for towerbase
	45' Air Guyed Tower Kit Code:TWA-10-02 Price: $299.00 Quantity in Basket: none
45' Air Guyed Tower Kit, does not include poles & anchors (Air Only), Kit Includes: (1)Base Connector (1)Upper Wire Set (280 ft. pre-cut) (1)Lower Wire Set (160 ft. pre-cut) (2)Base Staples (3)3/8"x 1.5" Bolt (3)3/8" Locknut (8)Cable Thimbles (16)Cable Clamps (1) Set Up Kit Pipes Needed: (Available at fence suppliers) Schedule 40 for 90 MPH wind rating Tower Kits use 1-7/8 inch (47.5 mm) Steel Tubing (1)24 foot (7.2 meter) length for tower (1)21 foot (6.3 meter) length for tower (1)6 foot (1.8 meter) length for tower base (1)21 foot (6.3 meter) length for guide pole
	36" Auger Code:wind-tower-9 Price: $47.00 Quantity in Basket: none
36" Auger, Set of 4 earth anchors
	36" Galvanized Augers Code:wind-tower-10 Price: $141.00 Quantity in Basket: none
36" Galvanized Augers, Set of 4 earth anchors
	48" Augers Code:wind-tower-11 Price: $59.00 Quantity in Basket: none
48" Augers, Set of 4 earth anchors
	48" Galvanized Augers Code:wind-tower-12 Price: $170.50 Quantity in Basket: none
48" Galvanized Augers, Set of 4 earth anchors
	Roof Mount Kit Without Seal Code:wind-4 Price: $71.00 Quantity in Basket: none
Roof Mount Kit Without Seal, Mounting hardware with 4 rubber isolators, (does not include pole or lag screws), Kits Include: (4)Isolators (2)Base Plates (2)Clamp Sleeves (2)Clamp Straps (4)5/16' x 1? Bolts (4)5/16' Lock Washers (2)Safety Leashes (1)Optional Roof Seal Kits include all parts for installation for 1-7/8" OD (47 mm) steel pipe with a .065" (1.6 mm) wall thickness and mounting bolts
	Roof-Seal Code:Roof-Seal Price: $29.00 Quantity in Basket: none
Southwest Wind Roof Seal, Seal for penetrating roofs only. Not used for side-of-building mounts
	29' EZ Tower Kit Code:TWA-11-01 Price: $573.00 Quantity in Basket: none
Complete Tower Kit (including pipe and anchors) for Air-X & Breeze Turbines Spec. Sheet -No concrete -No gin pole -No winching